 |
|
 |
RJ45+USB 2.0 JACK WITH LED >> TJ2201LU |
| Feature: Meets all IEEE 802.3U requirement .Designed for HUB application. Available in all turn ratios used by LAN IC manufactures. Primary center tapes available for additional EMI reduction. Simplest magnetic component to place and route on PCB. Conserves minimizing PCB space. |
 |
|
 |
 |
Quad Port 40 Pin SOIC >> TS40xxM |
| Feature: Designed for 10/100MB/s Transmission Over UTP-5 Cable. IEEE 802.3u & ANSIX 3.236-1995. Provides the Calbe interface, Isolation & Common Mode Filtering required by the PMD Sublayer. Designed to support four single or double stacked RJ-45 connectors. Low Profile Surface Mount Transfer Molded Package meets UL94-V0. |
|
|
|
 |
Quad Port 40 Pin SOIC >> TS40xxC |
| Feature: Designed for 10/100MB/s Transmission Over UTP-5 Cable. IEEE 802.3u & ANSIX 3.236-1995. Provides the Calbe interface, Isolation & Common Mode Filtering required by the PMD Sublayer. Designed to support four single or double stacked RJ-45 connectors. Low Profile Surface Mount Transfer Molded Package meets UL94-V0. |
|
|
|
 |
Dual Port 20 Pin DIL >> TD202xC |
| Feature: Symmetrical TX & RX channels for auto MDI/MDIX aplications. Meets all IEEE 802.3 and ANSIX 3.263 standard including 350uH OCL with 8 mADC Bias. Compact through hole footprint with 2.54mm pitch. |
|
|
|
 |
Dual Port 20 Pin DIL >> TD201xC |
| Feature: Symmetrical TX & RX channels for auto MDI/MDIX aplications. Meets all IEEE 802.3 and ANSIX 3.263 standard including 350uH OCL with 8 mADC Bias. Compact through hole footprint with 2.54mm pitch. |
|
|
|
 |
Single Port 16 Pin PCMCIA >> TS162xC |
| Feature: Meets IEEE 802.3 requirements. Ideal for TYPE I or TYPE II PCMCIA application. Low common mode noise & cross talk help system meet FCC/VDE EMI standard. Low profile packages for PC Card and Cardbus applications. |
|
|
|
 |
Single Port 24 Pin SOIC >> TS241xC |
| Feature: Meets all IEEE802.3 and ANSIX3.263 standard including 350 uH OCL with 8 mADC Bias. Cable interface for isolation and low common mode emissions. Low Profile Surface Mount Cased Package needs UL 94-V0. |
|
|
|
 |
Quad Port 48 Pin SOIC >> TS480 |
.Designed for long haul Gigabit Ethernet 100/1000 Base-T,full duplex aplications.
.Provides the Cable Interface,Isolation & Common Mode Filtering.
.Meet IEEE 802.3ab standard for 1000 Base-T,supports 4 pairs of category 5 UTP cable.
.Low Profile Surface Mount Cased Package need UL 94-V0. |
|
|
|
 |
Dual Port 24 Pin SOIC >> TS240xC |
.Designed for long haul Gigabit Ethernet 100/1000 Base-T,full duplex aplications.
.Provides the Cable Interface,Isolation & Common Mode Filtering. .Meet IEEE 802.3ab standard for 1000 Base-T,supports 4 pairs of category 5 UTP cable.
.Low Profile Surface Mount Cased Package need UL 94-V0. |
|
|
|
| [1] [2] Totally 15 items |
